I have been experimenting with sewing sound-generating circuits on textiles as part of the klangmaschinen workshop with Nico Kirisits and Klaus Filip. Here is some text.
title Stromtod engine rev.a
tag research
tag klangmaschinen
tag stromtod
tag wearable
tag circuitbending
tag tshirt
written 18.01.2009 12.20
title Gottfried Haider: Stromtod engine rev.a
tag me
tag sewing
tag tshirt
tag research
tag wearable
tag circuitbending
tag sterngasse
tag klangmaschinen
tag stromtod
taken 17.01.2009 16.24
title Gottfried Haider: Stromtod engine rev.a
description 555 timer VCO
tag onthego
tag wearable
tag pcb
tag circuitbending
tag 555
tag vco
tag klangmaschinen
tag stromtod
taken 17.01.2009 16.16
title Gottfried Haider: Stromtod engine rev.a
tag onthego
tag sewing
tag tshirt
tag wearable
tag pcb
tag circuitbending
tag connector
tag klangmaschinen
tag stromtod
taken 17.01.2009 15.59
"The trigger signal gets send into the 4n25 phototransistor optocoupler, this makes a connection between two points on the circuit-board that makes the internal sequencer advance one step."
filled under electronics diy circuitbending
on 28.12.2008 14.02
link Casio VL-1 with a build in trigger input
"The trigger signal gets send into the mini jack input. Then it goes through the 270K resistor. Then it goes into the transistor and makes the Collector and the Emitter connect. So connect the collector and the emitter of the 2n2222 to the points on the circuit that make the internal sequencer advance one step. Finally connect the earth of the jack to the earth of the battery inside the VL-Tone."
filled under diy circuitbending electronics
on 28.12.2008 14.01
link Gijs's Personal Home-Page
filled under sound diy artist netherlands circuitbending
on 28.12.2008 13.58
title Gottfried Haider: Stromtod engine rev.a
tag sewing
tag tshirt
tag wearable
tag circuitbending
tag klangmaschinen
tag stromtod
taken 09.12.2008 07.00